A P P E N D I X
C
Technical Specifications
The following sections describe the technical specifications for the Cisco Unified IP Phone 6901 and
6911.
•
•
•
Physical and Operating Environment Specifications
Table C-1 shows the physical and operating environment specifications for the Cisco Unified
IP Phone 6901.
Table C-1
Physical and Operating Environment Specifications for the Cisco Unified IP Phone 6901
Specification
Value or Range
Operating temperature 23° to 113°F (-5° to 45°C)
Operating relative humidity 10% to 90% (non-condensing)
Storage temperature
Height
-13° to 158°F (–25° to 70°C)
8.1 in. (20.5 cm)
Width
3.7 in. (9.4 cm)
Depth
•
•
•
•
•
•
•
•
2.12 in. (5.4 cm)—With footstand closed
3.42 in. (8.7 cm)—With footstand open
Weight
Power
1.37 lb (621.2 g)—Black handset phone (Europe)
1.37 lb (662 g)—White handset phone (Europe)
1.44 lb (655.2 g)—Black handset phone (North America)
1.53 lb (695 g)—White handset phone (North America)
100-240 VAC, 50-60 Hz, 0.5 A—When using the AC adapter
48 VDC, 0.2 A—When using the in-line power over the network cable
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24582-01
C-1
Appendix C Technical Specifications
Network and Access Port Pinouts
Network and Access Port Pinouts
Although both the network and access ports are used for network connectivity, they serve different
purposes and have different port pinouts.
•
•
The network port is labeled network on the Cisco Unified IP Phone.
The access port is labeled Computer on the Cisco Unified IP Phone (Cisco Unified IP Phone 6911
only).
Network Port Connector
Table C-3 describes the network port connector pinouts.
Table C-3
Network Port Connector Pinouts
Pin Number
Function
BI_DA+
BI_DA-
BI_DB+
BI_DC+
BI_DC-
BI_DB-
BI_DD+
BI_DD-
1
2
3
4
5
6
7
8
Note
“BI” stands for bi-directional, while DA, DB, DC and DD stand for “Data A”, “Data
B”, “Data C” and “Data D”, respectively.
Access Port Connector
Table C-4 describes the access port connector pinouts.
Table C-4
Access Port Connector Pinouts
Pin Number
Function
BI_DB+
BI_DB-
BI_DA+
BI_DD+
BI_DD-
BI_DA-
BI_DC+
BI_DC-
1
2
3
4
5
6
7
8
Note
“BI” stands for bi-directional, while DA, DB, DC and DD stand for “Data A”, “Data
B”, “Data C” and “Data D”, respectively.
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24582-01
C-3
Appendix C Technical Specifications
Network and Access Port Pinouts
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24582-01
C-4
|